因子分析在冀东峪耳崖金矿地球化学找矿中的应用

峪耳崖金矿位于华北板块北缘，矿区基底地层为太古界迁西群麻粒岩相和角闪岩相，矿体受NNE—NE向断裂构造控制，赋矿围岩为花岗岩。在矿床地质特征基础上，利用矿区土壤地球化学数据，采取传统统计法和累计频率法圈定了金矿12个元素的异常范围；运用因子分析方法划分出了Sb Hg Pb As元素组合、Au Ag Bi元素组合、Zn Cu Sn元素组合和W Mo元素组合；再对因子得分进行趋势面分析，较为有效地突出了深层次的找矿信息，更准确地圈出成矿靶区。结合研究区地质特征认为Au Ag Bi元素组合和Sb Hg Pb As元素组合为研究区最佳地球化学标志元素组合，下一步地质工作重点应放在矿区中矿带矿体深部及其南部异常高值区，同时布置少量工程在北矿带，以追索与唐杖子金矿之间的联系。     

Zero-Sequence Voltage-based Method for Determination and Classification of Unloaded Overhead Line Operating Conditions at the Moment of Energization

Overhead line energization can be performed under normal or faulty conditions. The latter indicates an occurrence of a fault along the line that exists at the moment of energization. This can lead to significant over-voltages that could endanger proper line operation. The issue gets more complex to protective devices when it comes to high-resistance faults, which impair the ability of relays to react promptly and accurately. Consequently, installation of additional detection devices becomes necessary. This paper proposes a novel method that properly detects and classifies line operating conditions at the moment of energization. The method is designed to be useful for utilities and it can be considered as a low-cost, fast, and accurate detection and classification approach, suitable for dealing with both low-resistance and high-resistance faults. Through comprehensive mathematical modeling it was found that both normal and faulty conditions during line energization are accompanied by the zero-sequence voltages of specific characteristics. The differences between zero voltage sequences are reflected in harmonic content, magnitudes of dominant frequencies, and their phase angles in regard to supply voltage. These findings are taken as the method's detection and classification criteria. The validity of the proposed model is verified by simulations and by field measurements.     

基于线特征及迭代最近点算法的地基建筑物点云自动配准方法

为克服迭代最近点(ICP)算法易陷入局部最优的缺陷，提出一种基于线特征及ICP算法的地基建筑物点云自动配准方法。首先，基于法向一致性进行建筑物点云平面分割；接着，采用alpha-shape算法进行点簇轮廓线提取，并拆分和拟合处理得到特征线段；然后，以线对作为配准基元，以线对夹角和距离作为相似性测度进行同名特征匹配，实现建筑物点云的粗配准；最后，以粗配准结果为初值，进一步采用ICP算法完成点云精确配准。利用两组部分重叠的建筑物点云进行配准实验，实验结果表明，采用由粗到精的配准方法能有效改善ICP算法对初值依赖的问题，实现具有部分重叠的建筑物点云的有效配准。     

链条套筒与销轴铰链副冲击载荷-往复运动的弹流润滑数值模拟

数值模拟链传动中销轴与套筒之间的定载荷和变载荷弹流润滑接触问题,套筒相对于销轴做纯滑动往复运动。定载荷是假定往复运动过程中载荷恒定不变;变载荷是假定链节在啮入和啮出链轮过程中存在的冲击载荷按正弦函数规律变化。比较在定载荷和变载荷加载条件下线接触往复运动工况的弹性润滑油膜变化情况,分析在动载荷加载条件下不同行程长度对弹性流体动力润滑特性的影响。研究发现,动载荷对油膜的压力、膜厚影响较大:随着动载荷的增加,油膜中压力急剧增大,膜厚减小;但加载方式对摩擦因数的影响不大;在相同的加载方式下,随着行程长度的增加,油膜压力减小,中心膜厚和最小膜厚显著增加。     

12000t/d水泥熟料生产线三次风管的优化改造*

水泥熟料生产过程中三次风管对分解炉和回转窑等热工设备的稳定运行起着重要作用。三次风管的用风和通风合理性,直接影响分解炉内煤粉的燃烧、碳酸盐在分解炉内的分解,间接影响回转窑内通风量和熟料在窑内的烧结。本文通过热工标定分析W工厂12000t/d水泥熟料生产线三次风管存在的问题,通过数据计算和对比分析,提出三次风管优化改造方案。     

基于光谱分类模型的保险杠物证无损研究

采用中红外光谱结合化学计量学的方法对车用保险杠碎片进行鉴别，分别对52个车用保险杠碎片样本的全波段光谱数据、指纹区光谱数据和主成分分析降维后的光谱数据建立Fisher判别分析和K近邻算法2种分类模型，并对分类结果进行比较。结果表明，主成分分析提取特征变量后构建的分类模型，分类的准确率更高，对聚丙烯（PP）、PP/滑石粉、PP/滑石粉/碳酸钙（CaCO₃）3种类型的样本分类准确率达到92.3 %，对PP/滑石粉类型中的10种品牌样本分类准确率达到88.9 %，分类结果理想；在构建的2种分类模型中，Fisher判别分析模型的分类率远高于K近邻算法模型，分析认为K近邻算法模型受到样本不均衡的影响；中红外光谱结合化学计量学可以实现对车用保险杠碎片的准确区分，且满足快速、无损的检验要求。     

Relative vibration identification of cutter and workpiece based on improved bidimensional empirical mode decomposition

Frontiers of Mechanical Engineering - In the process of cutting, the relative vibration between the cutter and the workpiece has an important effect on the surface topography. In this study, the...     

Balancing of parallel U-shaped assembly lines

A new hybrid assembly line design, called parallel U-shaped assembly line system, is introduced and characterised along with numerical examples for the first time. Different from existing studies on U-shaped lines, we combine the advantages of two individual line configurations (namely parallel lines and U-shaped lines) and create an opportunity for assigning tasks to multi-line workstations located in between two adjacent U-shaped lines with the aim of maximising resource utilisation. Utilisation of crossover workstations, in which tasks from opposite areas of a same U-shaped line can be performed, is also one of the main advantages of the U-shaped lines. As in traditional U-shaped line configurations, the newly proposed line configuration also supports the utilisation of crossover workstations. An efficient heuristic algorithm is developed to find well-balanced solutions for the proposed line configurations. Test cases derived from existing studies and modified in accordance with the proposed system in this study are solved using the proposed heuristic algorithm. The comparison of results obtained when the lines are balanced independently and when the lines are balanced together (in parallel to each other) clearly indicates that the parallelisation of U-shaped lines helps decrease the need for workforce significantly.     

New spraying process development for inlet deflector roller in a recoiling line

The inlet deflector rollers of a recoiling line are sprayed rollers. Short scratch lines have been found on the surface of steel sheets during commissioning. By adjusting the control parameters of the line and investigating the manufacturing process of inlet deflector rollers,the root cause of the scratches was found. By modifying the manufacturing process of the rollers,the scratches have been thoroughly eliminated,and quality steel sheets have been consistently produced in the recoiling line.     

Indirect adaptive control of nonlinear system via dynamic multilayer neural networks with multi‐time scales

This paper deals with adaptive nonlinear identification and trajectory tracking problem via dynamic multilayer neural network with different time scales. By means of a Lyapunov‐like analysis, we determine stability conditions for the on‐line identification. Then, a sliding mode controller is designed for trajectory tracking with consideration of the modeling error and disturbance. The main contributions of the paper lie in the following aspects. First, we extend our prior identification results of single‐layer dynamic neural networks with multi‐time scales to those of multilayer case. Second, the e‐modification in standard use in adaptive control is introduced in the on‐line update laws to guarantee bounded weights and bounded identification errors. Third, the potential singularity problem in controller design is solved by using new update laws for the NN weights so that the control signal is guaranteed bounded. The stability of proposed controller is proved by using Lyapunov function. Simulation results demonstrate the effectiveness of the proposed algorithm. Copyright © 2014 John Wiley & Sons, Ltd.